What is the Messaging Pattern? Which Messaging Pattern WCF supports?
Posted by: Prasham | Show/Hide Answer
Messaging Pattern : Messaging patterns describes how client and server should exchange the message. There is a protocol between client and server for sending and receiving the message. These are also called Message Exchange Pattern.
WCF supports following 3 types of Message Exchange Patterns
1. request - reply (default message exchange pattern)
2. OneWay (Simplex / datagram)
3. Duplex(CallBack)
Thanks
Prasham
Which is the default Message Exchange Pattern (MEP) ?
Posted by: Prasham | Show/Hide Answer
NOTE: This is objective type question, Please click question title for correct answer.
in WCF, Which contract is used to document the errors occurred in the service to client?
Posted by: Peermohamedmydeen | Show/Hide Answer
Fault Contract is used to document the errors occurred in the service to client.
Difference between Web Services and WCF
Posted by: Jmaneesh | Show/Hide Answer
Major Difference is That Web Services Use XmlSerializer But WCF Uses
DataContractSerializer which is better in Performance as Compared to XmlSerializer.
Key issues with XmlSerializer to serialize .NET types to XML
* Only Public fields or Properties of .NET types can be translated into XML.
* Only the classes which implement IEnumerable interface.
* Classes that implement the IDictionary interface, such as Hash table can not be serialized.
The DataContractAttribute can be applied to the class or a strcture. DataMemberAttribute can be applied to field or a property and theses fields or properties can be either public or private.
Important difference between DataContractSerializer and XMLSerializer.
* A practical benefit of the design of the DataContractSerializer is better performance over Xmlserializer.
* XML Serialization does not indicate the which fields or properties of the type are serialized into XML where as DataCotratSerializer Explicitly shows the which fields or properties are serialized into XML.
* The DataContractSerializer can translate the HashTable into XML.
Which namespace is required in a class to use DataContract or DataMember attribute for a class or properties?
Posted by: Raja | Show/Hide Answer
NOTE: This is objective type question, Please click question title for correct answer.
What is the use of ServiceBehavior attribute in WCF ?
Posted by: Raja | Show/Hide Answer
ServiceBehaviour attribute is used to specify the InstanceContextMode for the WCF Service class (This can be used to maintained a state of the service or a client too)
There are three instance Context Mode in the WFC
PerSession : This is used to create a new instance for a service and the same instance is used for all method for a particular client. (eg: State can be maintained per session by declaring a variable)
PerCall : This is used to create a new instance for every call from the client whether same client or different. (eg: No state can be maintained as every time a new instance of the service is created)
Single : This is used to create only one instance of the service and the same instance is used for all the client request. (eg: Global state can be maintained but this will be applicable for all clients)
What is a SOA Service?
Posted by: Abhisek | Show/Hide Answer
SOA is Service Oriented Architecture. SOA service is the encapsulation of a high level business concept. A SOA service is composed of three parts.
1. A service class implementing the service to be provided.
2. An environment to host the service.
3. One or more endpoints to which clients will connect.
Which namespace is used to access WCF service?
Posted by: Abhisek | Show/Hide Answer
NOTE: This is objective type question, Please click question title for correct answer.
What is WCF?
Posted by: Sagarp | Show/Hide Answer
Answer edited by Webmaster
Windows Communication Foundation (WCF) is an SDK for developing and deploying services on Windows. WCF provides a runtime environment for services, enabling you to expose CLR types as services, and to consume other services as CLR types.
WCF is part of .NET 3.0 and requires .NET 2.0, so it can only run on systems that support it.
(content from another post: http://www.dotnetfunda.com/interview/exam283-what-is-wcf.aspx)
Difference between WCF and Web services?
Posted by: Majith | Show/Hide Answer
Web Services
1.It Can be accessed only over HTTP
2.It works in stateless environment
WCF
WCF is flexible because its services can be hosted in different types of applications. The following lists several common scenarios for hosting WCF services:
IIS
WAS
Self-hosting
Managed Windows Service
What are the various ways of hosting a WCF service?
Posted by: Majith | Show/Hide Answer
Self hosting the service in his own application domain. This we have already covered in the first section. The service comes in to existence when you create the object of ServiceHost class and the service closes when you call the Close of the ServiceHost class.
Host in application domain or process provided by IIS Server.
Host in Application domain and process provided by WAS (Windows Activation Service) Server.
What is three major points in WCF?
Posted by: Majith | Show/Hide Answer
We Should remember ABC.
Address --- Specifies the location of the service which will be like http://Myserver/MyService.Clients will use this location to communicate with our service.
Binding --- Specifies how the two paries will communicate in term of transport and encoding and protocols
Contract --- Specifies the interface between client and the server.It's a simple interface with some attribute.
What is the difference WCF and Web services?
Posted by: Raja | Show/Hide Answer
Web services can only be invoked by HTTP (traditional webservice with .asmx). While WCF Service or a WCF component can be invoked by any protocol (like http, tcp etc.) and any transport type.
Second web services are not flexible. However, WCF Services are flexible. If you make a new version of the service then you need to just expose a new end. Therefore, services are agile and which is a very practical approach looking at the current business trends.
We develop WCF as contracts, interface, operations, and data contracts. As the developer we are more focused on the business logic services and need not worry about channel stack. WCF is a unified programming API for any kind of services so we create the service and use configuration information to set up the communication mechanism like HTTP/TCP/MSMQ etc
For more details, read http://msdn.microsoft.com/en-us/library/aa738737.aspx
What are various ways of hosting WCF Services?
Posted by: Raja | Show/Hide Answer
There are three major ways of hosting a WCF services
• Self-hosting the service in his own application domain. This we have already covered in the first section. The service comes in to existence when you create the object of Service Host class and the service closes when you call the Close of the Service Host class.
• Host in application domain or process provided by IIS Server.
• Host in Application domain and process provided by WAS (Windows Activation Service) Server.
More details http://www.dotnetfunda.com/articles/article221.aspx#whatarethevariouswaysofhostingaWCFservice
What was the code name for WCF?
Posted by: Raja | Show/Hide Answer
The code name of WCF was Indigo .
WCF is a unification of .NET framework communication technologies which unites the following technologies:-
NET remoting
MSMQ
Web services
COM+
What are the main components of WCF?
Posted by: Raja | Show/Hide Answer
The main components of WCF are
1. Service class
2. Hosting environment
3. End point
For more details read http://www.dotnetfunda.com/articles/article221.aspx#WhatarethemaincomponentsofWCF
How to set the timeout property for the WCF Service client call?
Posted by: Poster | Show/Hide Answer
The timeout property can be set for the WCF Service client call using binding tag.
...
binding = "wsHttpBinding"
bindingConfiguration = "LongTimeout"
...
/>
If no timeout has been specified, the default is considered as 1 minute.
How to deal with operation overloading while exposing the WCF services?
Posted by: Poster | Show/Hide Answer
By default overload operations (methods) are not supported in WSDL based operation. However by using Name property of OperationContract attribute, we can deal with operation overloading scenario.
[ServiceContract]
interface ICalculator
{
[OperationContract(Name = "AddInt")]
int Add(int arg1,int arg2);
[OperationContract(Name = "AddDouble")]
double Add(double arg1,double arg2);
}
Notice that both method name in the above interface is same (Add), however the Name property of the OperationContract is different. In this case client proxy will have two methods with different name AddInt and AddDouble.
How to configure Reliability while communicating with WCF Services?
Posted by: Poster | Show/Hide Answer
Reliability can be configured in the client config file by adding reliableSession under binding tag.
address = "net.tcp://localhost:8888/MyService"
binding = "netTcpBinding"
bindingConfiguration = "ReliableCommunication"
contract = "IMyContract"
/>
Reliability is supported by following bindings only
NetTcpBinding
WSHttpBinding
WSFederationHttpBinding
WSDualHttpBinding
What is Transport and Message Reliability?
Posted by: Poster | Show/Hide Answer
Transport reliability (such as the one offered by TCP) offers point-to-point guaranteed delivery at the network packet level, as well as guarantees the order of the packets. Transport reliability is not resilient to dropping network connections and a variety of other communication problems.
Message reliability deals with reliability at the message level independent of how many packets are required to deliver the message. Message reliability provides for end-to-end guaranteed delivery and order of messages, regardless of how many intermediaries are involved, and how many network hops are required to deliver the message from the client to the service.
What are different elements of WCF Srevices Client configuration file?
Posted by: Poster | Show/Hide Answer
WCF Services client configuration file contains endpoint, address, binding and contract. A sample client config file looks like
address = "http://localhost:8000/MyService/"
binding = "wsHttpBinding"
contract = "IMyContract"
/>
What is Proxy and how to generate proxy for WCF Services?
Posted by: Poster | Show/Hide Answer
The proxy is a CLR class that exposes a single CLR interface representing the service contract. The proxy provides the same operations as service's contract, but also has additional methods for managing the proxy life cycle and the connection to the service. The proxy completely encapsulates every aspect of the service: its location, its implementation technology and runtime platform, and the communication transport.
The proxy can be generated using Visual Studio by right clicking Reference and clicking on Add Service Reference. This brings up the Add Service Reference dialog box, where you need to supply the base address of the service (or a base address and a MEX URI) and the namespace to contain the proxy.
Proxy can also be generated by using SvcUtil.exe command-line utility. We need to provide SvcUtil with the HTTP-GET address or the metadata exchange endpoint address and, optionally, with a proxy filename. The default proxy filename is output.cs but you can also use the /out switch to indicate a different name.
SvcUtil http://localhost/MyService/MyService.svc /out:Proxy.cs
When we are hosting in IIS and selecting a port other than port 80 (such as port 88), we must provide that port number as part of the base address:
SvcUtil http://localhost:88/MyService/MyService.svc /out:Proxy.cs
What is the address formats of the WCF transport schemas?
Posted by: Raja | Show/Hide Answer
Address format of WCF transport schema always follow
[transport]://[machine or domain][:optional port] format.
for example:
HTTP Address Format
http://localhost:8888
the way to read the above url is
"Using HTTP, go to the machine called localhost, where on port 8888 someone is waiting"
When the port number is not specified, the default port is 80.
TCP Address Format
net.tcp://localhost:8888/MyService
When a port number is not specified, the default port is 808:
net.tcp://localhost/MyService
NOTE: Two HTTP and TCP addresses from the same host can share a port, even on the same machine.
IPC Address Format
net.pipe://localhost/MyPipe
We can only open a named pipe once per machine, and therefore it is not possible for two named pipe addresses to share a pipe name on the same machine.
MSMQ Address Format
net.msmq://localhost/private/MyService
net.msmq://localhost/MyService
How to define a service as REST based service in WCF?
Posted by: Poster | Show/Hide Answer
WCF 3.5 provides explicit support for RESTful communication using a new binding named WebHttpBinding.
The below code shows how to expose a RESTful service
[ServiceContract]
interface IStock
{
[OperationContract]
[WebGet]
int GetStock(string StockId);
}
By adding the WebGetAttribute, we can define a service as REST based service that can be accessible using HTTP GET operation.
What are contracts in WCF?
Posted by: Poster | Show/Hide Answer
In WCF, all services expose contracts. The contract is a platform-neutral and standard way of describing what the service does.
WCF defines four types of contracts.
Service contracts
Describe which operations the client can perform on the service.
There are two types of Service Contracts.
ServiceContract - This attribute is used to define the Interface.
OperationContract - This attribute is used to define the method inside Interface.
[ServiceContract]
interface IMyContract
{
[OperationContract]
string MyMethod( );
}
class MyService : IMyContract
{
public string MyMethod( )
{
return "Hello World";
}
}
Data contracts
Define which data types are passed to and from the service. WCF defines implicit contracts for built-in types such as int and string, but we can easily define explicit opt-in data contracts for custom types.
There are two types of Data Contracts.
DataContract - attribute used to define the class
DataMember - attribute used to define the properties.
[DataContract]
class Contact
{
[DataMember]
public string FirstName;
[DataMember]
public string LastName;
}
If DataMember attributes are not specified for a properties in the class, that property can't be passed to-from web service.
Fault contracts
Define which errors are raised by the service, and how the service handles and propagates errors to its clients.
Message contracts
Allow the service to interact directly with messages. Message contracts can be typed or untyped, and are useful in interoperability cases and when there is an existing message format we have to comply with.
What is endpoint in WCF?
Posted by: Poster | Show/Hide Answer
Every service must have Address that defines where the service resides, Contract that defines what the service does and a Binding that defines how to communicate with the service. In WCF the relationship between Address, Contract and Binding is called Endpoint.
The Endpoint is the fusion of Address, Contract and Binding.
What is binding and how many types of bindings are there in WCF?
Posted by: Poster | Show/Hide Answer
A binding defines how an endpoint communicates to the world. A binding defines the transport (such as HTTP or TCP) and the encoding being used (such as text or binary). A binding can contain binding elements that specify details like the security mechanisms used to secure messages, or the message pattern used by an endpoint.
WCF supports nine types of bindings.
Basic binding
Offered by the BasicHttpBinding class, this is designed to expose a WCF service as a legacy ASMX web service, so that old clients can work with new services. When used by the client, this binding enables new WCF clients to work with old ASMX services.
TCP binding
Offered by the NetTcpBinding class, this uses TCP for cross-machine communication on the intranet. It supports a variety of features, including reliability, transactions, and security, and is optimized for WCF-to-WCF communication. As a result, it requires both the client and the service to use WCF.
Peer network binding
Offered by the NetPeerTcpBinding class, this uses peer networking as a transport. The peer network-enabled client and services all subscribe to the same grid and broadcast messages to it.
IPC binding
Offered by the NetNamedPipeBinding class, this uses named pipes as a transport for same-machine communication. It is the most secure binding since it cannot accept calls from outside the machine and it supports a variety of features similar to the TCP binding.
Web Service (WS) binding
Offered by the WSHttpBinding class, this uses HTTP or HTTPS for transport, and is designed to offer a variety of features such as reliability, transactions, and security over the Internet.
Federated WS binding
Offered by the WSFederationHttpBinding class, this is a specialization of the WS binding, offering support for federated security.
Duplex WS binding
Offered by the WSDualHttpBinding class, this is similar to the WS binding except it also supports bidirectional communication from the service to the client.
MSMQ binding
Offered by the NetMsmqBinding class, this uses MSMQ for transport and is designed to offer support for disconnected queued calls.
MSMQ integration binding
Offered by the MsmqIntegrationBinding class, this converts WCF messages to and from MSMQ messages, and is designed to interoperate with legacy MSMQ clients.
For WCF binding comparison, see http://www.pluralsight.com/community/blogs/aaron/archive/2007/03/22/46560.aspx
Where we can host WCF services?
Posted by: Poster | Show/Hide Answer
Every WCF services must be hosted somewhere. There are three ways of hosting WCF services.
They are
1. IIS
2. Self Hosting
3. WAS (Windows Activation Service)
For more details see http://msdn.microsoft.com/en-us/library/bb332338.aspx
What is address in WCF and how many types of transport schemas are there in WCF?
Posted by: Poster | Show/Hide Answer
Address is a way of letting client know that where a service is located. In WCF, every service is associated with a unique address. This contains the location of the service and transport schemas.
WCF supports following transport schemas
HTTP
TCP
Peer network
IPC (Inter-Process Communication over named pipes)
MSMQ
The sample address for above transport schema may look like
http://localhost:81
http://localhost:81/MyService
net.tcp://localhost:82/MyService
net.pipe://localhost/MyPipeService
net.msmq://localhost/private/MyMsMqService
net.msmq://localhost/MyMsMqService
What is service and client in perspective of data communication?
Posted by: Poster | Show/Hide Answer
A service is a unit of functionality exposed to the world.
The client of a service is merely the party consuming the service.
What is WCF?
Posted by: Poster | Show/Hide Answer
Windows Communication Foundation (WCF) is an SDK for developing and deploying services on Windows. WCF provides a runtime environment for services, enabling you to expose CLR types as services, and to consume other services as CLR types.
WCF is part of .NET 3.0 and requires .NET 2.0, so it can only run on systems that support it.
What are contracts in WCF?
Posted by: Poster | Show/Hide Answer
In WCF, all services expose contracts. The contract is a platform-neutral and standard way of describing what the service does.
WCF defines four types of contracts.
Service contracts
Describe which operations the client can perform on the service.
There are two types of Service Contracts.
ServiceContract - This attribute is used to define the Interface.
OperationContract - This attribute is used to define the method inside Interface.
[ServiceContract]
interface IMyContract
{
[OperationContract]
string MyMethod( );
}
class MyService : IMyContract
{
public string MyMethod( )
{
return "Hello World";
}
}
Data contracts
Define which data types are passed to and from the service. WCF defines implicit contracts for built-in types such as int and string, but we can easily define explicit opt-in data contracts for custom types.
There are two types of Data Contracts.
DataContract - attribute used to define the class
DataMember - attribute used to define the properties.
[DataContract]
class Contact
{
[DataMember]
public string FirstName;
[DataMember]
public string LastName;
}
If DataMember attributes are not specified for a properties in the class, that property can't be passed to-from web service.
Fault contracts
Define which errors are raised by the service, and how the service handles and propagates errors to its clients.
Message contracts
Allow the service to interact directly with messages. Message contracts can be typed or untyped, and are useful in interoperability cases and when there is an existing message format we have to comply with.
What is endpoint in WCF?
Posted by: Poster | Show/Hide Answer
Every service must have Address that defines where the service resides, Contract that defines what the service does and a Binding that defines how to communicate with the service. In WCF the relationship between Address, Contract and Binding is called Endpoint.
The Endpoint is the fusion of Address, Contract and Binding.
What is binding and how many types of bindings are there in WCF?
Posted by: Poster | Show/Hide Answer
A binding defines how an endpoint communicates to the world. A binding defines the transport (such as HTTP or TCP) and the encoding being used (such as text or binary). A binding can contain binding elements that specify details like the security mechanisms used to secure messages, or the message pattern used by an endpoint.
WCF supports nine types of bindings.
Basic binding
Offered by the BasicHttpBinding class, this is designed to expose a WCF service as a legacy ASMX web service, so that old clients can work with new services. When used by the client, this binding enables new WCF clients to work with old ASMX services.
TCP binding
Offered by the NetTcpBinding class, this uses TCP for cross-machine communication on the intranet. It supports a variety of features, including reliability, transactions, and security, and is optimized for WCF-to-WCF communication. As a result, it requires both the client and the service to use WCF.
Peer network binding
Offered by the NetPeerTcpBinding class, this uses peer networking as a transport. The peer network-enabled client and services all subscribe to the same grid and broadcast messages to it.
IPC binding
Offered by the NetNamedPipeBinding class, this uses named pipes as a transport for same-machine communication. It is the most secure binding since it cannot accept calls from outside the machine and it supports a variety of features similar to the TCP binding.
Web Service (WS) binding
Offered by the WSHttpBinding class, this uses HTTP or HTTPS for transport, and is designed to offer a variety of features such as reliability, transactions, and security over the Internet.
Federated WS binding
Offered by the WSFederationHttpBinding class, this is a specialization of the WS binding, offering support for federated security.
Duplex WS binding
Offered by the WSDualHttpBinding class, this is similar to the WS binding except it also supports bidirectional communication from the service to the client.
MSMQ binding
Offered by the NetMsmqBinding class, this uses MSMQ for transport and is designed to offer support for disconnected queued calls.
MSMQ integration binding
Offered by the MsmqIntegrationBinding class, this converts WCF messages to and from MSMQ messages, and is designed to interoperate with legacy MSMQ clients.
For WCF binding comparison, see http://www.pluralsight.com/community/blogs/aaron/archive/2007/03/22/46560.aspx
Where we can host WCF services?
Posted by: Poster | Show/Hide Answer
Every WCF services must be hosted somewhere. There are three ways of hosting WCF services.
They are
1. IIS
2. Self Hosting
3. WAS (Windows Activation Service)
For more details see http://msdn.microsoft.com/en-us/library/bb332338.aspx
What is address in WCF and how many types of transport schemas are there in WCF?
Posted by: Poster | Show/Hide Answer
Address is a way of letting client know that where a service is located. In WCF, every service is associated with a unique address. This contains the location of the service and transport schemas.
WCF supports following transport schemas
HTTP
TCP
Peer network
IPC (Inter-Process Communication over named pipes)
MSMQ
The sample address for above transport schema may look like
http://localhost:81
http://localhost:81/MyService
net.tcp://localhost:82/MyService
net.pipe://localhost/MyPipeService
net.msmq://localhost/private/MyMsMqService
net.msmq://localhost/MyMsMqService
What is service and client in perspective of data communication?
Posted by: Poster | Show/Hide Answer
A service is a unit of functionality exposed to the world.
The client of a service is merely the party consuming the service.
What is WCF?
Posted by: Poster | Show/Hide Answer
Windows Communication Foundation (WCF) is an SDK for developing and deploying services on Windows. WCF provides a runtime environment for services, enabling you to expose CLR types as services, and to consume other services as CLR types.
WCF is part of .NET 3.0 and requires .NET 2.0, so it can only run on systems that support it.
Posted by: Prasham | Show/Hide Answer
Messaging Pattern : Messaging patterns describes how client and server should exchange the message. There is a protocol between client and server for sending and receiving the message. These are also called Message Exchange Pattern.
WCF supports following 3 types of Message Exchange Patterns
1. request - reply (default message exchange pattern)
2. OneWay (Simplex / datagram)
3. Duplex(CallBack)
Thanks
Prasham
Which is the default Message Exchange Pattern (MEP) ?
Posted by: Prasham | Show/Hide Answer
NOTE: This is objective type question, Please click question title for correct answer.
in WCF, Which contract is used to document the errors occurred in the service to client?
Posted by: Peermohamedmydeen | Show/Hide Answer
Fault Contract is used to document the errors occurred in the service to client.
Difference between Web Services and WCF
Posted by: Jmaneesh | Show/Hide Answer
Major Difference is That Web Services Use XmlSerializer But WCF Uses
DataContractSerializer which is better in Performance as Compared to XmlSerializer.
Key issues with XmlSerializer to serialize .NET types to XML
* Only Public fields or Properties of .NET types can be translated into XML.
* Only the classes which implement IEnumerable interface.
* Classes that implement the IDictionary interface, such as Hash table can not be serialized.
The DataContractAttribute can be applied to the class or a strcture. DataMemberAttribute can be applied to field or a property and theses fields or properties can be either public or private.
Important difference between DataContractSerializer and XMLSerializer.
* A practical benefit of the design of the DataContractSerializer is better performance over Xmlserializer.
* XML Serialization does not indicate the which fields or properties of the type are serialized into XML where as DataCotratSerializer Explicitly shows the which fields or properties are serialized into XML.
* The DataContractSerializer can translate the HashTable into XML.
Which namespace is required in a class to use DataContract or DataMember attribute for a class or properties?
Posted by: Raja | Show/Hide Answer
NOTE: This is objective type question, Please click question title for correct answer.
What is the use of ServiceBehavior attribute in WCF ?
Posted by: Raja | Show/Hide Answer
ServiceBehaviour attribute is used to specify the InstanceContextMode for the WCF Service class (This can be used to maintained a state of the service or a client too)
There are three instance Context Mode in the WFC
PerSession : This is used to create a new instance for a service and the same instance is used for all method for a particular client. (eg: State can be maintained per session by declaring a variable)
PerCall : This is used to create a new instance for every call from the client whether same client or different. (eg: No state can be maintained as every time a new instance of the service is created)
Single : This is used to create only one instance of the service and the same instance is used for all the client request. (eg: Global state can be maintained but this will be applicable for all clients)
What is a SOA Service?
Posted by: Abhisek | Show/Hide Answer
SOA is Service Oriented Architecture. SOA service is the encapsulation of a high level business concept. A SOA service is composed of three parts.
1. A service class implementing the service to be provided.
2. An environment to host the service.
3. One or more endpoints to which clients will connect.
Which namespace is used to access WCF service?
Posted by: Abhisek | Show/Hide Answer
NOTE: This is objective type question, Please click question title for correct answer.
What is WCF?
Posted by: Sagarp | Show/Hide Answer
Answer edited by Webmaster
Windows Communication Foundation (WCF) is an SDK for developing and deploying services on Windows. WCF provides a runtime environment for services, enabling you to expose CLR types as services, and to consume other services as CLR types.
WCF is part of .NET 3.0 and requires .NET 2.0, so it can only run on systems that support it.
(content from another post: http://www.dotnetfunda.com/interview/exam283-what-is-wcf.aspx)
Difference between WCF and Web services?
Posted by: Majith | Show/Hide Answer
Web Services
1.It Can be accessed only over HTTP
2.It works in stateless environment
WCF
WCF is flexible because its services can be hosted in different types of applications. The following lists several common scenarios for hosting WCF services:
IIS
WAS
Self-hosting
Managed Windows Service
What are the various ways of hosting a WCF service?
Posted by: Majith | Show/Hide Answer
Self hosting the service in his own application domain. This we have already covered in the first section. The service comes in to existence when you create the object of ServiceHost class and the service closes when you call the Close of the ServiceHost class.
Host in application domain or process provided by IIS Server.
Host in Application domain and process provided by WAS (Windows Activation Service) Server.
What is three major points in WCF?
Posted by: Majith | Show/Hide Answer
We Should remember ABC.
Address --- Specifies the location of the service which will be like http://Myserver/MyService.Clients will use this location to communicate with our service.
Binding --- Specifies how the two paries will communicate in term of transport and encoding and protocols
Contract --- Specifies the interface between client and the server.It's a simple interface with some attribute.
What is the difference WCF and Web services?
Posted by: Raja | Show/Hide Answer
Web services can only be invoked by HTTP (traditional webservice with .asmx). While WCF Service or a WCF component can be invoked by any protocol (like http, tcp etc.) and any transport type.
Second web services are not flexible. However, WCF Services are flexible. If you make a new version of the service then you need to just expose a new end. Therefore, services are agile and which is a very practical approach looking at the current business trends.
We develop WCF as contracts, interface, operations, and data contracts. As the developer we are more focused on the business logic services and need not worry about channel stack. WCF is a unified programming API for any kind of services so we create the service and use configuration information to set up the communication mechanism like HTTP/TCP/MSMQ etc
For more details, read http://msdn.microsoft.com/en-us/library/aa738737.aspx
What are various ways of hosting WCF Services?
Posted by: Raja | Show/Hide Answer
There are three major ways of hosting a WCF services
• Self-hosting the service in his own application domain. This we have already covered in the first section. The service comes in to existence when you create the object of Service Host class and the service closes when you call the Close of the Service Host class.
• Host in application domain or process provided by IIS Server.
• Host in Application domain and process provided by WAS (Windows Activation Service) Server.
More details http://www.dotnetfunda.com/articles/article221.aspx#whatarethevariouswaysofhostingaWCFservice
What was the code name for WCF?
Posted by: Raja | Show/Hide Answer
The code name of WCF was Indigo .
WCF is a unification of .NET framework communication technologies which unites the following technologies:-
NET remoting
MSMQ
Web services
COM+
What are the main components of WCF?
Posted by: Raja | Show/Hide Answer
The main components of WCF are
1. Service class
2. Hosting environment
3. End point
For more details read http://www.dotnetfunda.com/articles/article221.aspx#WhatarethemaincomponentsofWCF
How to set the timeout property for the WCF Service client call?
Posted by: Poster | Show/Hide Answer
The timeout property can be set for the WCF Service client call using binding tag.
...
binding = "wsHttpBinding"
bindingConfiguration = "LongTimeout"
...
/>
If no timeout has been specified, the default is considered as 1 minute.
How to deal with operation overloading while exposing the WCF services?
Posted by: Poster | Show/Hide Answer
By default overload operations (methods) are not supported in WSDL based operation. However by using Name property of OperationContract attribute, we can deal with operation overloading scenario.
[ServiceContract]
interface ICalculator
{
[OperationContract(Name = "AddInt")]
int Add(int arg1,int arg2);
[OperationContract(Name = "AddDouble")]
double Add(double arg1,double arg2);
}
Notice that both method name in the above interface is same (Add), however the Name property of the OperationContract is different. In this case client proxy will have two methods with different name AddInt and AddDouble.
How to configure Reliability while communicating with WCF Services?
Posted by: Poster | Show/Hide Answer
Reliability can be configured in the client config file by adding reliableSession under binding tag.
address = "net.tcp://localhost:8888/MyService"
binding = "netTcpBinding"
bindingConfiguration = "ReliableCommunication"
contract = "IMyContract"
/>
Reliability is supported by following bindings only
NetTcpBinding
WSHttpBinding
WSFederationHttpBinding
WSDualHttpBinding
What is Transport and Message Reliability?
Posted by: Poster | Show/Hide Answer
Transport reliability (such as the one offered by TCP) offers point-to-point guaranteed delivery at the network packet level, as well as guarantees the order of the packets. Transport reliability is not resilient to dropping network connections and a variety of other communication problems.
Message reliability deals with reliability at the message level independent of how many packets are required to deliver the message. Message reliability provides for end-to-end guaranteed delivery and order of messages, regardless of how many intermediaries are involved, and how many network hops are required to deliver the message from the client to the service.
What are different elements of WCF Srevices Client configuration file?
Posted by: Poster | Show/Hide Answer
WCF Services client configuration file contains endpoint, address, binding and contract. A sample client config file looks like
address = "http://localhost:8000/MyService/"
binding = "wsHttpBinding"
contract = "IMyContract"
/>
What is Proxy and how to generate proxy for WCF Services?
Posted by: Poster | Show/Hide Answer
The proxy is a CLR class that exposes a single CLR interface representing the service contract. The proxy provides the same operations as service's contract, but also has additional methods for managing the proxy life cycle and the connection to the service. The proxy completely encapsulates every aspect of the service: its location, its implementation technology and runtime platform, and the communication transport.
The proxy can be generated using Visual Studio by right clicking Reference and clicking on Add Service Reference. This brings up the Add Service Reference dialog box, where you need to supply the base address of the service (or a base address and a MEX URI) and the namespace to contain the proxy.
Proxy can also be generated by using SvcUtil.exe command-line utility. We need to provide SvcUtil with the HTTP-GET address or the metadata exchange endpoint address and, optionally, with a proxy filename. The default proxy filename is output.cs but you can also use the /out switch to indicate a different name.
SvcUtil http://localhost/MyService/MyService.svc /out:Proxy.cs
When we are hosting in IIS and selecting a port other than port 80 (such as port 88), we must provide that port number as part of the base address:
SvcUtil http://localhost:88/MyService/MyService.svc /out:Proxy.cs
What is the address formats of the WCF transport schemas?
Posted by: Raja | Show/Hide Answer
Address format of WCF transport schema always follow
[transport]://[machine or domain][:optional port] format.
for example:
HTTP Address Format
http://localhost:8888
the way to read the above url is
"Using HTTP, go to the machine called localhost, where on port 8888 someone is waiting"
When the port number is not specified, the default port is 80.
TCP Address Format
net.tcp://localhost:8888/MyService
When a port number is not specified, the default port is 808:
net.tcp://localhost/MyService
NOTE: Two HTTP and TCP addresses from the same host can share a port, even on the same machine.
IPC Address Format
net.pipe://localhost/MyPipe
We can only open a named pipe once per machine, and therefore it is not possible for two named pipe addresses to share a pipe name on the same machine.
MSMQ Address Format
net.msmq://localhost/private/MyService
net.msmq://localhost/MyService
How to define a service as REST based service in WCF?
Posted by: Poster | Show/Hide Answer
WCF 3.5 provides explicit support for RESTful communication using a new binding named WebHttpBinding.
The below code shows how to expose a RESTful service
[ServiceContract]
interface IStock
{
[OperationContract]
[WebGet]
int GetStock(string StockId);
}
By adding the WebGetAttribute, we can define a service as REST based service that can be accessible using HTTP GET operation.
What are contracts in WCF?
Posted by: Poster | Show/Hide Answer
In WCF, all services expose contracts. The contract is a platform-neutral and standard way of describing what the service does.
WCF defines four types of contracts.
Service contracts
Describe which operations the client can perform on the service.
There are two types of Service Contracts.
ServiceContract - This attribute is used to define the Interface.
OperationContract - This attribute is used to define the method inside Interface.
[ServiceContract]
interface IMyContract
{
[OperationContract]
string MyMethod( );
}
class MyService : IMyContract
{
public string MyMethod( )
{
return "Hello World";
}
}
Data contracts
Define which data types are passed to and from the service. WCF defines implicit contracts for built-in types such as int and string, but we can easily define explicit opt-in data contracts for custom types.
There are two types of Data Contracts.
DataContract - attribute used to define the class
DataMember - attribute used to define the properties.
[DataContract]
class Contact
{
[DataMember]
public string FirstName;
[DataMember]
public string LastName;
}
If DataMember attributes are not specified for a properties in the class, that property can't be passed to-from web service.
Fault contracts
Define which errors are raised by the service, and how the service handles and propagates errors to its clients.
Message contracts
Allow the service to interact directly with messages. Message contracts can be typed or untyped, and are useful in interoperability cases and when there is an existing message format we have to comply with.
What is endpoint in WCF?
Posted by: Poster | Show/Hide Answer
Every service must have Address that defines where the service resides, Contract that defines what the service does and a Binding that defines how to communicate with the service. In WCF the relationship between Address, Contract and Binding is called Endpoint.
The Endpoint is the fusion of Address, Contract and Binding.
What is binding and how many types of bindings are there in WCF?
Posted by: Poster | Show/Hide Answer
A binding defines how an endpoint communicates to the world. A binding defines the transport (such as HTTP or TCP) and the encoding being used (such as text or binary). A binding can contain binding elements that specify details like the security mechanisms used to secure messages, or the message pattern used by an endpoint.
WCF supports nine types of bindings.
Basic binding
Offered by the BasicHttpBinding class, this is designed to expose a WCF service as a legacy ASMX web service, so that old clients can work with new services. When used by the client, this binding enables new WCF clients to work with old ASMX services.
TCP binding
Offered by the NetTcpBinding class, this uses TCP for cross-machine communication on the intranet. It supports a variety of features, including reliability, transactions, and security, and is optimized for WCF-to-WCF communication. As a result, it requires both the client and the service to use WCF.
Peer network binding
Offered by the NetPeerTcpBinding class, this uses peer networking as a transport. The peer network-enabled client and services all subscribe to the same grid and broadcast messages to it.
IPC binding
Offered by the NetNamedPipeBinding class, this uses named pipes as a transport for same-machine communication. It is the most secure binding since it cannot accept calls from outside the machine and it supports a variety of features similar to the TCP binding.
Web Service (WS) binding
Offered by the WSHttpBinding class, this uses HTTP or HTTPS for transport, and is designed to offer a variety of features such as reliability, transactions, and security over the Internet.
Federated WS binding
Offered by the WSFederationHttpBinding class, this is a specialization of the WS binding, offering support for federated security.
Duplex WS binding
Offered by the WSDualHttpBinding class, this is similar to the WS binding except it also supports bidirectional communication from the service to the client.
MSMQ binding
Offered by the NetMsmqBinding class, this uses MSMQ for transport and is designed to offer support for disconnected queued calls.
MSMQ integration binding
Offered by the MsmqIntegrationBinding class, this converts WCF messages to and from MSMQ messages, and is designed to interoperate with legacy MSMQ clients.
For WCF binding comparison, see http://www.pluralsight.com/community/blogs/aaron/archive/2007/03/22/46560.aspx
Where we can host WCF services?
Posted by: Poster | Show/Hide Answer
Every WCF services must be hosted somewhere. There are three ways of hosting WCF services.
They are
1. IIS
2. Self Hosting
3. WAS (Windows Activation Service)
For more details see http://msdn.microsoft.com/en-us/library/bb332338.aspx
What is address in WCF and how many types of transport schemas are there in WCF?
Posted by: Poster | Show/Hide Answer
Address is a way of letting client know that where a service is located. In WCF, every service is associated with a unique address. This contains the location of the service and transport schemas.
WCF supports following transport schemas
HTTP
TCP
Peer network
IPC (Inter-Process Communication over named pipes)
MSMQ
The sample address for above transport schema may look like
http://localhost:81
http://localhost:81/MyService
net.tcp://localhost:82/MyService
net.pipe://localhost/MyPipeService
net.msmq://localhost/private/MyMsMqService
net.msmq://localhost/MyMsMqService
What is service and client in perspective of data communication?
Posted by: Poster | Show/Hide Answer
A service is a unit of functionality exposed to the world.
The client of a service is merely the party consuming the service.
What is WCF?
Posted by: Poster | Show/Hide Answer
Windows Communication Foundation (WCF) is an SDK for developing and deploying services on Windows. WCF provides a runtime environment for services, enabling you to expose CLR types as services, and to consume other services as CLR types.
WCF is part of .NET 3.0 and requires .NET 2.0, so it can only run on systems that support it.
What are contracts in WCF?
Posted by: Poster | Show/Hide Answer
In WCF, all services expose contracts. The contract is a platform-neutral and standard way of describing what the service does.
WCF defines four types of contracts.
Service contracts
Describe which operations the client can perform on the service.
There are two types of Service Contracts.
ServiceContract - This attribute is used to define the Interface.
OperationContract - This attribute is used to define the method inside Interface.
[ServiceContract]
interface IMyContract
{
[OperationContract]
string MyMethod( );
}
class MyService : IMyContract
{
public string MyMethod( )
{
return "Hello World";
}
}
Data contracts
Define which data types are passed to and from the service. WCF defines implicit contracts for built-in types such as int and string, but we can easily define explicit opt-in data contracts for custom types.
There are two types of Data Contracts.
DataContract - attribute used to define the class
DataMember - attribute used to define the properties.
[DataContract]
class Contact
{
[DataMember]
public string FirstName;
[DataMember]
public string LastName;
}
If DataMember attributes are not specified for a properties in the class, that property can't be passed to-from web service.
Fault contracts
Define which errors are raised by the service, and how the service handles and propagates errors to its clients.
Message contracts
Allow the service to interact directly with messages. Message contracts can be typed or untyped, and are useful in interoperability cases and when there is an existing message format we have to comply with.
What is endpoint in WCF?
Posted by: Poster | Show/Hide Answer
Every service must have Address that defines where the service resides, Contract that defines what the service does and a Binding that defines how to communicate with the service. In WCF the relationship between Address, Contract and Binding is called Endpoint.
The Endpoint is the fusion of Address, Contract and Binding.
What is binding and how many types of bindings are there in WCF?
Posted by: Poster | Show/Hide Answer
A binding defines how an endpoint communicates to the world. A binding defines the transport (such as HTTP or TCP) and the encoding being used (such as text or binary). A binding can contain binding elements that specify details like the security mechanisms used to secure messages, or the message pattern used by an endpoint.
WCF supports nine types of bindings.
Basic binding
Offered by the BasicHttpBinding class, this is designed to expose a WCF service as a legacy ASMX web service, so that old clients can work with new services. When used by the client, this binding enables new WCF clients to work with old ASMX services.
TCP binding
Offered by the NetTcpBinding class, this uses TCP for cross-machine communication on the intranet. It supports a variety of features, including reliability, transactions, and security, and is optimized for WCF-to-WCF communication. As a result, it requires both the client and the service to use WCF.
Peer network binding
Offered by the NetPeerTcpBinding class, this uses peer networking as a transport. The peer network-enabled client and services all subscribe to the same grid and broadcast messages to it.
IPC binding
Offered by the NetNamedPipeBinding class, this uses named pipes as a transport for same-machine communication. It is the most secure binding since it cannot accept calls from outside the machine and it supports a variety of features similar to the TCP binding.
Web Service (WS) binding
Offered by the WSHttpBinding class, this uses HTTP or HTTPS for transport, and is designed to offer a variety of features such as reliability, transactions, and security over the Internet.
Federated WS binding
Offered by the WSFederationHttpBinding class, this is a specialization of the WS binding, offering support for federated security.
Duplex WS binding
Offered by the WSDualHttpBinding class, this is similar to the WS binding except it also supports bidirectional communication from the service to the client.
MSMQ binding
Offered by the NetMsmqBinding class, this uses MSMQ for transport and is designed to offer support for disconnected queued calls.
MSMQ integration binding
Offered by the MsmqIntegrationBinding class, this converts WCF messages to and from MSMQ messages, and is designed to interoperate with legacy MSMQ clients.
For WCF binding comparison, see http://www.pluralsight.com/community/blogs/aaron/archive/2007/03/22/46560.aspx
Where we can host WCF services?
Posted by: Poster | Show/Hide Answer
Every WCF services must be hosted somewhere. There are three ways of hosting WCF services.
They are
1. IIS
2. Self Hosting
3. WAS (Windows Activation Service)
For more details see http://msdn.microsoft.com/en-us/library/bb332338.aspx
What is address in WCF and how many types of transport schemas are there in WCF?
Posted by: Poster | Show/Hide Answer
Address is a way of letting client know that where a service is located. In WCF, every service is associated with a unique address. This contains the location of the service and transport schemas.
WCF supports following transport schemas
HTTP
TCP
Peer network
IPC (Inter-Process Communication over named pipes)
MSMQ
The sample address for above transport schema may look like
http://localhost:81
http://localhost:81/MyService
net.tcp://localhost:82/MyService
net.pipe://localhost/MyPipeService
net.msmq://localhost/private/MyMsMqService
net.msmq://localhost/MyMsMqService
What is service and client in perspective of data communication?
Posted by: Poster | Show/Hide Answer
A service is a unit of functionality exposed to the world.
The client of a service is merely the party consuming the service.
What is WCF?
Posted by: Poster | Show/Hide Answer
Windows Communication Foundation (WCF) is an SDK for developing and deploying services on Windows. WCF provides a runtime environment for services, enabling you to expose CLR types as services, and to consume other services as CLR types.
WCF is part of .NET 3.0 and requires .NET 2.0, so it can only run on systems that support it.
Comments
Post a Comment